When the water-cooled chiller is used for six months, it is necessary to clean the condenser of the chiller and the water pipe. In addition, to clean the cooling tower, the correct cleaning method can be performed as follows:
1. Clean up the sediment, scale, silt and long moss in the cooling tower, and then use the cleaning water gun to clean the fan, sprinkler, packing, tray, water tank and water filter of the water tower.
2. After the above components are cleaned, start the circulating water pump, put the cleaning agent and bactericidal algicide in the cooling tower, control the pH of the water between 5.5 and 6.0, and remove the rust and algae in the equipment pipes. .
3. After cleaning the cooling tower, close the upper drain valve and reopen the water supply valve to fill the cooling tower with water. At the same time, the communication valve of the cooling tower is opened, and the water level of the communication tower is adjusted to balance to avoid overflow.
The user's industry is different, and the water temperature of the water-cooled chiller is not the same. With the cooling tower, the heat from the water from the water-cooled chiller can be continuously taken away. If the cooling effect of the cooling tower is not good, The cold effect of the mechanism must be greatly reduced.